Table of Contents
Advertisement
Step 11.
Under Policy > Incoming, set as shown below:
Select the VPN trunk for VPN Trunk.
Click OK to complete the settings.
Creating a Policy to Apply the VPN Trunk Settings
For B Company, set as shown below:
Step 1. Type in "mmc" in the Search field on the Start menu or in the Run
command box, and then set as shown below:
Select "File" from the menu bar and then select "Add/Remove
Snap-in".
In the Add or Remove Snap-ins window, follow the steps below :
Select "IP Security Policy Management" from the Available
Tick the radio box of "Local Computer", and then clickFinish.
Click OK to complete the settings.
In the Console Root tree, right-click IP Security Policies on
Local Computer and then click Create IP Security Policy.
In the IP Security Policy Wizard window, follow the steps below:
Click Next.
Type in "VPN_B" in the Name field.
Click Next.
Click Next.
Tick the box of "Edit properties" and then click Finish.
Policy Successfully Created
snap-ins column on the left, and then click Add.
Gigabit Multi-Homing VPN Security Gateway
193
MH-2300
Advertisement
Table of Contents
