Planet MH-2300 User Manual page 327

Terms in Policy
Source Address & Destination Address
Source address and Destination address is based around using the device
as a point of reference. The initiating point of a session is referred to as the
source address.
For a quick modification of address, Mapped IPs, Port Mapping and
Port-Mapping Group settings, click the IP address in the Source or
Destination column.
Service
The service to be regulated. Available options are the system default
services and the customized services.
To modify the service settings, click the service in the Service column.
Options
It shows the function that has been activated. When a function is activated,
the symbol corresponding to it will appear (see the table below).
Symbol Meaning
Schedule
Authentication
Packet Logging
Traffic Grapher
Web Filter
Application
Bl
QoS
IP Redirection
Schedule
The time at which a policy executes.
To modify the schedule settings, click the schedule icon
column.
Authentication
This requires users to be authenticated to create a connection.
To modify the schedule settings, click the schedule icon
column.
The policy is applied as scheduled. scheduled.
Authentication is applied to the policy.
Packet logging is activated by the policy.
Traffic grapher is activated by the policy.
Web filtering is activated by the policy.
Application blocking is activated by the policy.
ki
QoS is activated by the policy.
The source address in the packets processed
by the policy will carry a translated IP or their
original IP based on the selected option:
Automatic, Routing or NAT.
Gigabit Multi-Homing VPN Security Gateway
Description
327
MH-2300
in the Options
in the Options