Table of Contents
Advertisement
Step18.
Go to Policy Object > VPN > Trunk, click New Entry and then
set as shown below:
Type the name in the Name field.
Local Settings: select LAN. Enter the IP address and the Mask in
the Local IP / Netmask field.
Under the Remote Settings section, select Remote IP / Netmask
and then enter the subnet and the mask.
Move the VPN_02 from the Available Tunnels to the Selected
Tunnels.
Tick Enable NetBIOS Broadcast over VPN.
Click OK.
Gigabit Multi-Homing VPN Security Gateway
Configuring the Second Trunk
The Second Trunk Created
262
MH-2300
Advertisement
Table of Contents
