Table of Contents
Advertisement
Router 2 (10.10.10.2).
Step 1. Go to System > Configuration > Routing Table and then set as
shown below:
Click New Entry.
IP Version : Select "IPv4".
IP Address: Type "192.168.10.0".
Netmask: "255.255.255.0".
Gateway : "192.168.1.252".
Interface : Select "Port 1 (LAN1)".
Click OK.
Click New Entry.
IP Version : Select "IPv4".
IP Address: Type "192.168.20.0".
Netmask: "255.255.255.0".
Gateway : "192.168.1.252".
Interface : "Port1 (LAN1)".
Click OK.
Click New Entry.
IP Version : Select "IPv4".
IP Address: Type "10.10.10.0".
Netmask: Type "255.255.255.0".
Gateway : Type "192.168.1.252".
Interface : Select " Port1 (LAN1)".
Click OK.
Adding the First Static Routing Address
Adding the Second Static Routing Address
32
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
