Table of Contents
Advertisement
4.1.1 Examples of Policy Creating
4.1.1.1 Creating a Policy to Allow Specific LAN Users the
Access to FTP Service
Step 1. Under Policy Object > Address > LAN, set as shown below:
Click New Entry.
Specify a name for the LAN IP address.
Address Type: Select either "Specific IP" or "IP range".
IP Version: Select "IPv4" or "IPv6".
IP Address: Specify the IP address of the user. (e.g.,
192.168.3.2)
Netmask: Enter "255.255.255.255" to match a single IPv4
address.
MAC Address: Click Clone MAC Address to obtain the MAC
address.
Select the network subnet (interface) that the address resides in.
Click OK.
1.
The network addresses created under Policy Object > Address > WAN /
LAN / DMZ are available for export and import. You may export the addresses for
editing and archival purposes and import them in the event of data loss.
2.
For your easy configuration, the MAC address is also obtainable by clicking
the Clone MAC Address button.
3.
To manually bind an IP address to a MAC address, use Assign Static IP
under System > Configuration > DHCP.
4.
By default, each type of network has an address setting (i.e., the first
Gigabit Multi-Homing VPN Security Gateway
Adding a LAN Address Entry
LAN Address Successfully Added
75
MH-2300
Advertisement
Table of Contents
