Operations Using The Edit Items Tree - Mitsubishi Electric GOT 1000 Series Manual

6.3.2

Operations using the Edit items tree

The Edit items tree shows overall MES interface function settings in a tree.
This section explains the operations using the Edit items tree.
(1) Selecting an item
1.
When double-clicking the project root or each setting type, some items are displayed.
2.
Selecting one of the items displays the corresponding edit screen on the detailed setting edit screen area.
(2) Adding an item
1.
Selecting an item or a setting type to be added and performing either of the following will add the item.
• Select an item of the same type or a setting type, right-click the mouse, and choose [Add].
• Double-click a setting type that contains no item.
2.
When the item is added properly, it is automatically selected and the edit screen is switched to the one for
the added item.
POINT POINT POINT
Since the number of items that can be added is limited depending on the setting type, refer to the relevant section
of each item.
(3) Deleting an item
1.
Select an item to be deleted and right-click the mouse. Selecting [Delete] deletes the item.
POINT POINT POINT
For precautions on the item deletion, refer to the following.
6.12 (2) When deleting an item
Project root
Item
Setting type
6.3 Screen Structure
1
2
3
4
5
6
7
8
6 - 3