Mitsubishi Electric GOT 1000 Series Manual page 210

Error event ID
404
405
406
407
501
502
503
504
8 - 12 8.2 Error Code List
Error description and cause
The access log file could not be opened.
The log could not be written to the access log file.
Failed to delete an old access log file.
Failed to rename the access log file.
The computer ran out of memory when initializing the
SQL failure log file.
The computer ran out of resources when initializing the
SQL failure log file.
The full path name of the SQL failure log file is too long.
The SQL failure log file could not be opened.
Corrective action
• If no directory exists for storing the access log file,
create it.
• When the attribute of the access log file is set to read-
only, cancel the setting.
• If read/write is disabled for the access log file, enable it
in the security setting.
• When the access log file name represents a directory,
rename or delete the directory.
• When the access log file has been open in another
application, terminate the application.
• Check the disk device for any fault.
• When the disk space is full, ensure a free disk space.
• When the access log file has been open in another
application, terminate the application.
• Check the disk device for any fault.
• When the attribute of the oldest access log file is set to
read-only, cancel the setting.
• If read/write is disabled for the oldest access log file,
enable it in the security setting.
• When the oldest access log file has been open in
another application, terminate the application.
• Check the disk device for any fault.
• When the attributes of the new and old access log files
are set to read-only, cancel the setting.
• If read/write is disabled for the new and old access log
files, enable it in the security setting.
• When the new and old access log files have been open
in another application, terminate the application.
• Check the disk device for any fault.
• Terminate any unnecessary applications.
• Add more memory to the personal computer.
• Shorten the path to the SQL failure log file with DB
Connection Service Setting Tool.
7.5 Setting Items of DB Connection Service
Setting Tool
• If no directory exists for storing the SQL failure log file,
create it.
• When the attribute of the SQL failure log file is set to
read-only, cancel the setting.
• If read/write is disabled for the SQL failure log file,
enable it in the security setting.
• When the SQL failure log file name represents a
directory, rename or delete the directory.
• When the SQL failure log file has been open in another
application, terminate the application.
• Check the disk device for any fault.
(To the next page)