Mitsubishi Electric GOT 1000 Series Manual page 70

(d) Manually resending data
Execute manual resend of the DB buffer data.
Request for resend on [MES interface setting] - [Diagnosis]
tab
Request for resend on [Resend DB buffer request] of the
specified tag component
• 6.9.2 Setting items in DB buffering settings
• 6.10.5 Manipulating DB buffering (DB buffering
operation)
• This section (2) Factors for starting DB buffering
In the order of storage in the DB buffer, the accumulated data
1)
of the jobs with Manual resend setting are sent again. * 1
If a job with manual resend setting is started during manual
2)
resending, its SQL texts are stored in the DB buffer and then
sent to the database. * 1
Not completed
If a job with manual resend setting is started after completion
3) of manual resending, its SQL texts are sent to the database
if it is accessible, without being buffered. * 1
* 1 Manually resending data
The numbers 1) to 3) correspond to those shown in the above.
Job setting
Job 1 (Auto)
Job 2 (Auto)
Job 3 (Auto)
Job 4 (Manual)
Job 5 (Manual)
Job 6 (Manual)
Job 10 (Manual)
Job 11 (Manual)
5 - 20 5.1 DB Interface Function
Start
Were the SQL texts sent
to the database?
Sent
Has all the manual resend
processing been completed?
Completed
Is there any job for which
Auto resend is selected?
No
End
DB buffer
Job 3_SQL TEXT (Auto)
Job 6_SQL TEXT (Manual)
Job 4_SQL TEXT (Manual)
Job 1_SQL TEXT (Auto)
Job 2_SQL TEXT (Auto)
Job 5_SQL TEXT (Manual)
After line recovery, retry the manual resend of DB buffer
data.
Not sent
Yes
Data of the job with Auto Resend setting are sent again
after recovery.
(c) Automatically resending data after recovery
2)
3)
Database
1)
Job 6_SQL TEXT (Manual)
Job 4_SQL TEXT (Manual)
Job 5_SQL TEXT (Manual)
Job 10_SQL TEXT (Manual)
Job 11_SQL TEXT (Manual)