6.10.6 Checking the trigger buffering (Trigger buffering status)
This section explains checking the number of data buffered, the current buffer utilizations, and the highest buffer
utilizations of the trigger buffering function.
For the trigger buffering function, refer to the following:
5.1.5 Trigger buffering function
No. of bufferings
A value is not displayed when the value is being obtained or could not be obtained.
Any of the following operation clears the highest value.
• Power off the GOT.
• Reset the GOT (when changing the communication settings, etc.)
• Install the OS from GT Designer3
• Download project data, etc.
• Restart the MES interface function
• One-shot execution
When a large number of data is buffered, check the number of job settings and the trigger condition setting.
Shows the current number of bufferings (number of
Shows the number of bufferings (number of buffered
jobs) in the past.
6 - 91