Mitsubishi Electric GOT 1000 Series Manual page 176

(b) Conditions for sending the sent resource data
When restarting the GOT, the GOT may send the sent data.
Multiple records are created in the database when the GOT sends the sent data.
The following shows conditions for sending the sent resource data.
Logging
Advanced user alarm
Advanced system alarm
Operation log
(c) Collecting no resource data when executing an action
1) When the data in the field set for [Field name setting] does not exist.
The GOT sends the data of "" (Null) to the field.
The following resource data shows the resource data types with no data depending on conditions.
Logging
Advanced user alarm
Advanced system alarm
Operation log
POINT POINT POINT
Set "null-capable" in the fields for the database.
Without setting "null-capable", an error occurs at the job execution.
For the database setting, refer to the manual for the database to be used.
2) Collecting no resource data after the last action
The action is succeeded without communicating the GOT with the database. (The MESInterface
Execute Log is output.)
The access log is not output to the server computer.
6 - 100 6.12 Precautions
Resource type
No sent resource data is sent.
• When restarting the GOT, the sent resource data is stored in the alarm log file.
• When restarting the GOT, the sent resource data is stored in the alarm log file.
• When restarting the GOT, the sent resource data is stored in the operation log file.
Resource type
LoggingDevice
Comments
None
Object name(OPNAME), Operation
level(OPERATOR), Operation level(OPE_ID), User
ID(USER_ID), Action No.(ACT_NO), Data
type(DATA_TYPE), Device name(DEV_NAME),
Change value(CHG_VALUE), Previous
value(PREV_VALUE)
Condition
Insert data Action execution
Sending no data
Sending ""(Null) data
-
Sending no data