Setting Items In Device Tag Settings - Mitsubishi Electric GOT 1000 Series Manual

6.5.1

Setting items in Device tag settings

Up to 64 items can be set in [Device tag settings] within one project.
Item
Device tag name
Sampling setting
Array setting
Component setting input
Component list
Array block size
No. of tag components in project
No. of statistical processings in project
No. of device points in tag
(1) Device tag name (Up to 16 characters)
Enter a device tag name.
Configured tags are used in [Job settings], etc.
For characters that can be used for device tag names, refer to the following:
Appendix2 About Monitoring Interval Timeout
Note that using the name same as the one set in [Server service settings] is not allowed.
(2) Sampling setting
(a) When sampling is enabled
The tag is sampled in the specified interval.
When selecting [Sampling], also set a sampling interval in units of seconds. The setting range for the
interval is 1 to 32767 seconds.
(b) When sampling is disabled
The tag is not sampled.
When [Do not sample] is selected, statistical processing cannot be performed for tag component values.
Enter a device tag name. (Up to 16 characters)
Set whether to periodically sample the tag or not.
Set a sampling interval to sample the tag.
Set whether to use arrays for the tag or not.
6.5.2 Setting items in Array setting
Configure the tag component settings.
6.5.3 Setting items in Component setting
Displays a list of the components that have been already set.
6.5.3 Setting items in Component setting
Make setting when changing the block size manually.
Displays the number of all the tag components in the project.
Displays the number of the components in the project, for which [Perform statisticcal processing] is selected.
Displays the number of total device points used in [Device Tag setting].
Description
6.5 Device Tag Settings
1
2
3
4
5
6
7
8
6 - 7