Mitsubishi Electric GOT 1000 Series Manual page 88

Component
setting input
Component
List
Array block size
POINT POINT POINT
The following are displayed on the status bar of [Device Tag setting].
• [No. of tag components in project]
The total number of tag components in the project is displayed.
• [No. of statistical processings in project]
The number of component settings in the project, for which [Perform statistical processing] is checked, is
displayed.
• [No. of device points in tag]
The total number of device points used in [Device tag settings] is displayed.
Up to 40000 device points can be set for a tag with [Array setting].
6 - 12 6.5 Device Tag Settings
Item
Component name Enter a component name. (Up to 16 characters)
Head device Set device name.
Data type Select the data type of the sampling data.
Character string length Set a character string length when [String] is selected for [Data type].(1 to 32 characters)
Perform statistical
Set whether to perform statistical processing or not.
processing
Component name Displays a component name.
Device Displays a device range used.
Data type Displays a data type.
Statistical type When [Perform statistical processing] is set, displays the type of statistical processing.
When [Array setting] is set, displays the device range of array No.n.
For a display example, refer to the following.
Device [n]
n (Arrray No.) Displays the array No. that is currently displayed in [Device [n]] of [Component List].
If this is clicked, the device range of the first array is displayed in [Device [n]] of [Component List].
<
button
When the device range of the first array is already displayed, this button cannot be clicked.
If this is clicked, the device range of the previous array is displayed in [Device [n]] of [Component List].
<
button
When the device range of the first array is already displayed, this button cannot be clicked.
If this is clicked, the device range of the next array is displayed in [Device [n]] of [Component List].
>
button
When the device range of the last array is already displayed, this button cannot be clicked.
If this is clicked, the device range of the last array is displayed in [Device [n]] of [Component List].
button
When the device range of the last array is already displayed, this button cannot be clicked.
Selecting a component in [Component List] and clicking the
component and the one immediately above it.
button
The
Selecting a component in [Component List] and clicking the
component and the one immediately below it.
button
The
Make setting when changing the block size manually.
6.5.2 Setting items in Array setting
button cannot be clicked on the first component.
button cannot be clicked on the last component.
Description
button reverses the order between the selected
button reverses the order between the selected