Download  Print this page

Mitsubishi Electric GOT 1000 Series Manual Page 202

Graphic operation terminal.
Hide thumbs

Advertisement

(3) [Job settings] (
Symptom
Unable to set [DB buffering setting].
Unable to set a new variable.
Unable to select [Trigger 2] in [Trigger
conditions].
Unable to set [Exception processing setting] in
[Communication action].
(4) [Diagnosis] tab (
Symptom
GT Designer3 cannot communicate with GOT.
(5) [Working log] tab (
Symptom
GT Designer3 cannot communicate with GOT.
No log is displayed.
No execution result is displayed in spite of SNTP
time synchronization setting.
8 - 4
8.1 Error Handling and Recovery Method
6.7 Job Settings)
Checked item
Is there any Select action set for the job?
Are there 64 variables that were already defined
in the job?
Is [Handshake operation] selected for [Trigger
1]?
Is the DB buffering enabled?
Is [Insert] set for [Action type]?
6.10 Diagnosis)
Checked item
Has Option OS (MES Interface) been installed?
6.11 Working Log)
Checked item
Has Option OS (MES Interface) been installed?
Is there a CF card inserted?
Is the MES interface function operating?
Is the time adjust function of the GOT disabled?
Corrective action
• Do not use Select actions in the job where DB
buffering is enabled.
• The DB buffering is not available for jobs
performing Select actions.
• Delete any unnecessary variable settings of
the job.
• Up to 64 variables can be set for one job.
• Select any other than [Handshake operation]
for [Trigger 1].
• When [Handshake operation] is selected,
selection is not allowed for [Trigger 2].
• Disable the DB buffering.
• Set any other than [Insert] for [Action type].
Corrective action
• Install Option OS (MES Interface) on the GOT.
Corrective action
• Install Option OS (MES Interface) on the GOT.
• Install a CF card.
• Turn ON the CF card access switch.
• On the Diagnosis tab, check the MES
interface function status.
• Check if Adjust is enabled with the Utility
function of the GOT.
• Check if Adjust is enabled in GT Designer3.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT 1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: