Mitsubishi Electric GOT 1000 Series Manual page 142

(1) Action type
Select an action type.
The selectable action type is the insert only.
Insert
(2) Database
Select a database to be accessed.
(3) Table name (1 to 32 characters)
Set a table name of the database to be accessed.
When the selected database is Wonderware
For characters that can be used for table names, refer to the following:
Appendix.1.4 Characters applicable to field names, table names, etc.
(4) Resource type
(Default: Logging)
Select a resource data type.
Logging
Advanced user alarm
Advanced system alarm
Operation log
6 - 66 6.8 Job Settings - Actions
Item
Generates a new record, and assigns a value (resource data) into a field.
Item
Device values of a controller that are collected at any timing or in specified intervals.
Alarm data that are collected in specified intervals for the advanced user alarm observation setting
Alarm data for controllers and a network that are collected by the advanced system alarm observation
setting
GOT operation history data collected by the operation log function
Description

Historian, the table name is fixed to [History].
Description