Setting items in Transmit resource action
Configure the settings for sending the resource data collected in a GOT to a database.
Before setting [Transmit resource action], configure the settings to collect the resource data (the logging setting,
the advanced user alarm observation, the advanced system alarm observation, and the operation log setting).
For details, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Functions)
The settings for collecting the resource data must be matched to the settings for the resource data send action.
When the settings are not matched, an error may occur at the job execution.
Field name setting
Confirm setting button
Logging ID/Alarm ID
Operation log file
Range of data
Generated SQL text
Up to 8192 fields can be set in [Field name setting] for each project.
(Check [No. of fields in project] in the lower left of the Transmit resource action dialog box.)
Select an action type.
Select a database to be accessed.
Select a table name of the database to be accessed.
Select a resource data type.
Set the assignments between the resource data to be sent and the field value for the database.
Clicking this button checks that the settings for collecting the resource data are matched to the settings
for the resource data send action.
An error message is displayed when the settings are not matched.
For the displayed error message, refer to the following.
Set the logging ID for the logging setting or the alarm ID that is set on the advanced alarm observation.
Clicking the Set operation log file name button displays the stored location for the operation log data to
Specify the number of resource data to be sent for each action.
Displays the SQL text that is generated during editing the data for [Transmit resource action].
6.8 Job Settings - Actions
6 - 65