Mitsubishi Electric GOT 1000 Series Manual page 205

Error code
0x41140087 DB buffer file error
0x41140089 DB buffer content error
0x41140093 DB buffer full error
0x41140099 DB buffering error
0x4114009F DB buffer read error
0x411400A1 DB buffer clear error
0x411400A3 DB buffer read error
0x411400A5 DB buffer empty error
0x411400A6 DB buffer content error
0x411400B2
0x411400B6
Character string number conversion error
0x411400BA
0x411400C0
0x411400D0 Overflow or zero divide error
0x411400D2 Operation error
0x411400D4 Logging function is not running.
0x411400D6 Invalid logging ID.
0x411400DC Advanced system alarm function is not available.
0x411400E2 Invalid alarm ID.
Error description and cause Corrective action
• The DB buffer file is invalid.
• The CF card may be corrupted.
• Replace the CF card.
• Data stored in the DB buffer are invalid.
• The CF card may be corrupted.
• Replace the CF card.
• Because the DB buffer became full, the data could not
be stored in the DB buffer.
• Ensure the CF card capacity.
• Failed in file operation during DB buffering operation.
• Check the CF card, and if corrupted, replace it.
• Data in the DB buffer could not be read normally.
• Check the CF card, and if corrupted, replace it.
• Failed to clear the DB buffer.
• Check the CF card, and if corrupted, replace it.
• Data in the DB buffer could not be read normally.
• Check the CF card, and if corrupted, replace it.
• The DB buffer is empty.
• Check the CF card, and if corrupted, replace it.
• Data stored in the DB buffer are invalid.
• Check the CF card, and if corrupted, replace it.
• Character strings could not be converted to numerical
values.
• Change the setting so that type conversion will be
available in any case.
• Division by zero was attempted.
• Change the setting to avoid division by zero.
• Invalid operation was performed.
• Change the setting so that any invalid operation will not
performed.
• Check that the option OS for the logging function for
installed on the GOT.
• Check that the logging setting is configured.
• The logging ID is invalid.
• Set the logging ID for the logging setting.
• The advanced system alarm setting is invalid.
• Set the advanced system alarm observation setting.
• The alarm ID is invalid.
• Set the alarm ID for the advanced user alarm
observation setting.
8.2 Error Code List
1
2
3
4
5
6
(To the next page)
7
8
8 - 7