Download  Print this page

Setting Items In Db Buffering; Notify Errors (job Cancellation) That Occur During Job Execution - Mitsubishi Electric GOT 1000 Series Manual

Graphic operation terminal.
Hide thumbs

Advertisement

6.7.4

Setting items in DB Buffering

Set whether to utilize the DB buffering function or not.
For the DB buffering function, refer to the following:
5.1.10 DB buffering function
Item
Enable DB buffering
Automatically resend at time of
restoration
POINT
POINT
POINT
Before resending data, the GOT communicates with the database.
At this time, if an action for communicating with the same database is set for a job, a long time is required for
execution of the job.
In the case of a large buffering size, it is advisable to resend the data manually while any job that is set to
communicate with the database is not in execution, so that no problem will arise even if the MES interface function
processing is affected.
6.7.5

Notify errors (job cancellation) that occur during job execution

Set whether to enable or disable notification of errors (job cancellation) that occur during job execution.
Job execution is canceled when access to the database fails or when type mismatch is found.
5.2 SNTP Time Synchronization Function
6.12 (b) Operation of numerical values
(1) Notify errors (job cancellation) that occur during job execution
(a) Set whether to enable or disable notification of errors (job cancellation) that occur during job execution.
When [Notify errors (job cancellation) that occur during job execution] box is checked, if job execution is
canceled, a value is assigned to the specified tag component.
(b) When [Notify errors (job cancellation) that occur during job execution] has been selected, set a tag
component to which a value is assigned.
1) Tag, Component
Select a tag component to which a value is assigned.
Tags that have a tag component with [Array setting] cannot be selected.
2) Substitute value
Directly enter a substitute value.
6 - 36
6.7 Job Settings
Set whether to enable the DB buffering or not.
Set whether or not to automatically resend data after recovery.
When the [Automatically resend at time of restoration] box is checked, resend processing is automatically
performed after recovery.
When the [Automatically resend at time of restoration] box is not checked, resend processing is manually
performed after recovery.
Description

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT 1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: