Manipulating Db Buffering (Db Buffering Operation) - Mitsubishi Electric GOT 1000 Series Manual

6.10.5 Manipulating DB buffering (DB buffering operation)

Operate the DB buffering.
For the DB buffering function, refer to the following:
5.1.10 DB buffering function
(1) Number of bufferings and Buffer utilization
This section explains checking the number of data buffered, the current buffer utilizations, and the highest buffer
utilizations of the DB buffering function.
Display
No. of bufferings
Buffer utilization
*1
*2
(2) Resending data stored in the DB buffer
1.
Clicking the
when manual resend is selected for the jobs of the SQL texts.
If resend processing fails, an error will be output to the MES interface Execute Log.
(3) Clearing the DB buffer
1.
Clicking the
6 - 90 6.10 Diagnosis
Shows the current number of bufferings (number of
*1
buffered jobs).
*1
Shows the current buffer utilization.
A value is not displayed when the value is being obtained or could not be obtained.
Any of the following operation clears the highest value.
• Power off the GOT.
• Reset the GOT (when changing the communication settings, etc.)
• Install the OS from GT Designer3
• Download project data, etc.
• Restart the MES interface function
• One-shot execution
Note that the highest value is not cleared if the MES interface function was stopped by the diagnostics function.
button executes the resend processing of the SQL texts stored in the DB buffer,
Resend
button clears all of the SQL texts that are stored in the DB buffer.
Clear
Description
Current value
Highest value
Shows the number of bufferings (number of buffered
jobs) in the past.
Shows the highest buffer utilization in the past.
*2