Mitsubishi Electric GOT 1000 Series Manual page 135

2) Send notification of this exception
If the [Send notification of this exception] checkbox is checked, a value is assigned to the specified tag
component when the number of records selected by [Select/Update conditions] is greater than the
number of arrays set in [Array setting].
[Array setting] is less than the number of records selected by [Select/Update conditions].
When selecting this, set a tag component to which a value is assigned.
• Tag, Component
Select a tag component to which a value is assigned.
Tags that have a tag component with [Array setting] cannot be selected.
• Substitute value
Directly enter a substitute value.
3) Continue this job
After executions of exception processing described in the above 1) and 2), the system continues
executions of other actions.
4) Finish this job (Default: Finish this job)
After executions of exception processing described in the above 1) and 2), the system forcibly
terminates the job without executing other actions.
At this time, substitute/insert values before execution of the exception processing are committed to the
database, and data written to tag component are updated.
POINT POINT POINT
(1) When a job is forcibly terminated, an error occurred during job execution (job cancellation) is not notified.
6.7.5 Notify errors (job cancellation) that occur during job execution
(2) If [Enable DB buffering] is selected for a job, its exception processing setting is disabled.
6.7.4 Setting items in DB Buffering
6.8 Job Settings - Actions
1
2
3
4
5
6
7
8
6 - 59