Job Execution Procedure - Mitsubishi Electric GOT 1000 Series Manual

5.1.2

Job execution procedure

The following is the job execution procedure.
Is the GOT working?
Is the job enabled?
Job execution starts when trigger conditions are met.
• 5.1.4 Trigger monitoring function
• 6.7.2 Setting items in Trigger conditions
When [Handshake operation] is selected for Trigger conditions,
tag component values are obtained again.
Is the [Execute
program before action.] box
The program in the application server computer is
executed before execution of the first action.
• 5.1.9 Program execution function
• 6.7.3 Setting items in Program execution
(To the next page)
5 - 2 5.1 DB Interface Function
Start
Working
Enabled
checked?
Checked
Stopped
No job is executed during the stop.
Activate the GOT.
• 6.10.1 Checking the MES Interface Function status
(Status)
• 6.10.2 Manipulating the MES Interface Function status
(Operation)
Disabled
The job is not executed when it is disabled.
Enable the job.
• 6.10.3 Changing the job status (Change job status)
Not checked