Changing The Job Status (Change Job Status) - Mitsubishi Electric GOT 1000 Series Manual

6.10.3 Changing the job status (Change job status)

The job status can be changed.
POINT POINT POINT
The job status changed by this operation returns to the status set in [Job settings] by powering OFF and ON or
resetting the GOT.
1.
From [Job list], select the job whose status is to be changed.
2.
Select a checkbox of the status to be changed.
Enable job
Enable startup logging
Enable detailed logging
Disable writing to GOT device
Disable writing to database
6 - 88 6.10 Diagnosis
Item
• Checked
The job is enabled and thereby it is executed when the trigger conditions are met.
• Not checked
The job is disabled, and thereby it is not executed even if the trigger conditions are met.
• Checked
The startup logging is enabled, and thereby startup records are logged.
*1
• Not checked
The startup logging is disabled, and thereby startup records are not logged.
• Checked
The detailed logging is enabled, and thereby detailed records are logged.
*2
• Not checked
The detailed logging is disabled, and thereby detailed records are not logged.
• Checked
Writing to PLC devices is disabled.
• Not checked
Writing to PLC devices is enabled.
• Checked
Writing to the database is disabled.
• Not checked
Writing to the database is enabled.
*3
Description