Download  Print this page

Mitsubishi Electric GOT 1000 Series Manual Page 92

Graphic operation terminal.
Hide thumbs

Advertisement

(7) Array block size
When [block] is selected in [Array setting], [array block size] setting is available.
Usually, the block size need not be changed because the it is automatically adjusted to avoid duplication of
components.
Change [array block size] when:
• Setting a desired number for the start device No. of each block.
• Adding any component in the future.
The following example explains the cases where [array block size] is manually set and is not set.
(Example) When [Component D] is to be added in the future
• When 10 is set for [array block size], device numbers are not changed.
• When nothing is set for [array block size], device numbers in and after array No.2 are changed.
Component name Device
Component A
Component B
Component C
Component D
Planned to
be added
(8) Precautions on [Component setting]
If a wrong device number is set for a component in [Component setting], an error will occur on another
component that has the same access target CPU setting.
Correct the device number in [Component setting].
6 - 16
6.5 Device Tag Settings
Data type
GD0
Single word
GD1
Double word
GD3
String (12 characters)
GD9
Single word
[When the size is set]
(Array block size = 10)
n=1
Component A
GD0
Component B
GD1 to GD2
Component C
GD3 to GD8
Component D
GD9
[When the size is not set]
n=1
Component A
GD0
Component B
GD1 to GD2
Component C
GD3 to GD8
Component D
GD9
n=2
n=3
GD10
GD20
GD11 to GD12
GD21 to GD22
GD13 to GD18
GD23 to GD28
GD19
GD29
n=2
n=3
GD9
GD18
GD10
GD20
GD10 to GD11
GD19 to GD20
GD11 to GD12
GD21 to GD22
GD12 to GD17
GD21 to GD26
GD13 to GD18
GD23 to GD28
GD19
GD29

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT 1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: