Mitsubishi Electric GOT 1000 Series Manual page 190

(2) DB access timeout (required) (Range: 1 to 3600; Default: 30)
Set a DB access timeout time (Unit: seconds) for writing/reading a database value from the GOT to the server
computer, or for the case where no response is returned after request for program execution.
When a timeout occurs, the connection with the GOT is disconnected and job execution is canceled.
POINT POINT POINT
Set a value to [DB access timeout] so that the relation with a value set in [Connection timeout] in [MES Interface
Configuration Tool] is as follows:
• Connection timeout value
(3) Limit IP addresses which permit to connect
(a) Specify whether or not to set IP addresses to which connection is to be permitted.
If the [limit IP addresses which permit to connect] box is checked, connection is permitted from only the
GOT with the specified IP address.
For IP addresses that are permitted to connect to DB Connection Service, at least one IP address setting is
required and up to 64 addresses can be set.
If the box is not checked, connection from any GOT will be permitted.
(b) When [limit IP addresses which permit to connect] is selected, set IP address(es).
1) Adding an IP address to permit its connection
<Specifying individual IP addresses>
1.
Set the following items and click the
2.
The IP address is added to the [Permitted IP addresses list].
(Example) 192.168.0.64
<Specifying IP addresses in a batch>
1.
Set the following items and click the
2.
The IP address/mask bit length is added to the [Permitted IP addresses list].
(Example) 192.168.0.64/26
7 - 14 7.5 Setting Items of DB Connection Service Setting Tool
DB access timeout value
Item
IP address
Mask bit length
Item
IP address
Mask bit length
button.
Add
Set an IP address in decimal notation so that its connection will be permitted.
(Blank)
button.
Add
Set an IP address in decimal notation so that its connection will be permitted.
Set the effective bit length of the set IP address.
(Range: 1 to 32)
Description
Description