Mitsubishi Electric GOT 1000 Series Manual page 106

(b) When [Value monitoring startup] is selected, specify conditions for comparison.
1) Tag, Component
Select a tag component to be compared with.
Tags that have a tag component with [Array setting] cannot be selected.
2) Condition
Select a condition for comparison.
=
3) Tag/Type
Select a tag or constant that is used as a condition for comparison.
Tags that have a tag component with [Array setting] cannot be selected.
4) Component
Select or enter a component/constant value that is used as a condition for comparison.
(Example)
The following shows that the job is activated when the value of the tag component (Process 1,
Temperature) reaches 45 or higher.
6 - 30 6.7 Job Settings
Item
The tag component value is equal to the condition value.
The tag component value is not equal to the condition value.
The tag component value is equal to or greater than the condition value.
(Not selectable when [Data type] of the tag component is [bit] or [String])
The tag component value is greater than the condition value.
(Not selectable when [Data type] of the tag component is [bit] or [String])
The tag component value is smaller than the condition value.
(Not selectable when [Data type] of the tag component is [bit] or [String])
The tag component value is equal to or smaller than the condition value.
(Not selectable when [Data type] of the tag component is [bit] or [String])
Description