Checking The Connection Of The Previous Job Execution (Connection Result Of Previous Job Execution) - Mitsubishi Electric GOT 1000 Series Manual

*1 The startup log can be confirmed in [Job Execute Log] on the [Working log] tab.
*2 [Enable detailed logging] is selectable only when [Test mode] is selected in [Job settings].
When [Enable detailed logging] is checked, [Enable startup logging] is also selected.
The detailed log can be confirmed in [Job Execute Log] on the [Working log] tab.
*3 When [Disable writing to database] is checked, the following processing are executed.
• The SQL text is sent to a database, and then the rollback is executed at the last.
Errors occur when the server service settings and the settings for the actions in [Job settings], including table names and field
names, are incorrect.
When an error occurs, check the settings.
• With Wonderware
INSERT INTO History (Data Time, TagName,Value) SELECT TOP 0 NULL.
NULL. NULL:
Errors occur when the server service settings are incorrect.
When an error occurs, check the server service settings.
No error occurs even though the settings for the action in [Job settings] are incorrect.
3.
Clicking the
Execute
6.10.4 Checking the connection of the previous job execution (Connection result of
previous job execution)
Connection with the server computer set in [Server service settings], which is made at the time of the previous job
execution, can be checked.
The following explains the display of [Connection result of previous job execution].
Displayed result
Connected
Disconnected
POINT POINT POINT
• The display of the connection result is not changed until the next job is executed to communicate the database
server computer.
• The result of the one-shot communication with the database server computer is not reflected.
6.11.2 Job Execute Log
6.7.1 (5) Test mode
6.11.2 Job Execute Log

Historian, the following SQL text is sent because the rollback cannot be used.
button changes the job status.
Normally connected to the server computer at the time of the previous job execution.
Initial status (Not connected to the database server computer), or normal connection could not be
established at the previous job execution and thereby the line was disconnected.
Description
6.10 Diagnosis
1
2
3
4
5
6
7
8
6 - 89