Download  Print this page

One-shot Execution - Mitsubishi Electric GOT 1000 Series Manual

Graphic operation terminal.
Hide thumbs

Advertisement

6.7.6

One-shot execution

Execute a job as a one-shot task.
Doing so allows the user to check the execution result of the currently editing [Job setting].
(1) Procedure for one-shot execution
POINT
POINT
POINT
• In [One-shot execution], settings of [Startup logging] and [DB Buffering] are not executed.
• All of job operations running with the MES interface function are temporarily disabled during one-shot
execution.
1.
Click the
One-shot execution
2.
Clicking the
3.
Check the execution result shown in the [View details] dialog box, which is displayed after the execution.
For the display of the [View details] dialog box, refer to the following:
Section 6.11.2 (3) Updating the Job Execute Log
POINT
POINT
POINT
A dialog box indicating the current processing status is displayed until completion of one-shot execution.
(2) Precautions for one-shot execution
(a) Precautions before one-shot execution
One-shot execution can be performed only when the MES interface function is active.
When the MES interface function is not active, check the status and restart the operation before starting
one-shot execution.
For restart of the MES interface function, refer to the following:
6.10.2 Manipulating the MES Interface Function status (Operation)
(b) Precautions during one-shot execution
Do not perform the following during one-shot execution.
• Do not disconnect the cable that is connected to the GOT during one-shot execution.
Doing so will cause the MES interface function to be inoperative.
• Do not remove the CF card from the GOT during one-shot execution.
Doing so will cause the MES interface function to be inoperative.
If the MES interface function becomes inoperative, check the status and restart the operation on the
Diagnosis tab.
For restart of the MES interface function, refer to the following:
6.10.2 Manipulating the MES Interface Function status (Operation)
(c) Precautions after one-shot execution
One-shot execution results are not reflected in [Connection result of previous job execution].
button with the [Job settings] edit screen displayed.
button performs one-shot job execution ignoring the trigger conditions.
One-shot execution
6 - 37
6.7 Job Settings
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT 1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: