Mitsubishi Electric GOT 1000 Series Manual page 130

(e) Component
Select or directly enter a component/constant value that is used as a condition for comparison.
If [Variable] is selected for [Tag], select or directly enter a variable.
POINT POINT POINT
For tag components, constants or variables, refer to the following:
This section (4) (e) About tag components
•
This section (4) (f) About constants
•
This section (4) (g) About variables
•
(6) Select sort settings
When [Select] or [MultiSelect] is selected in [Action type], set conditions for sorting the records to be selected/
multi-selected.
If multiple sort conditions are set, the database will process the conditions in order, starting from the top.
In [Select sort settings], settings of up to eight lines are allowed for each communication action.
(a) Field name (Up to 32 characters)
Set a field name for records to be selected.
For characters that can be used for field names and table names, refer to the following.
Appendix.1.4 Characters applicable to field names, table names, etc.
6 - 54 6.8 Job Settings - Actions