Mitsubishi Electric GOT 1000 Series Manual page 229

Appendix5 Application Example of MES Interface
Function
The following is an example of the system where the MES interface function is used.
Example) A system where manufacturing information is collected in a GOT and managed in a database
In the company-wide integrated system in which parts acceptance, manufacturing processing, assembly, shipment, and
inventory control are managed, information of the actual performance is managed in a database using the MES interface
function.
A process line control PLC handles information on process line (equipment) stop, running time, down time, quantity of
production, and the number of rejected products.
On the GOT, the status of each process line is displayed, allowing control by operators.
By the MES interface function, the termination time of the process line, regularly-checked operation rate, and fraction
defective information are managed.
The system configuration is illustrated below.
Database
<Server computer>
IP address: 192.168.11.1
<GOT>
IP address: 192.168.11.101
Engineering process
Process line
Ethernet
App - 13