Table of Contents
Advertisement
4.9.4 TCP MODBUS
The TCP Modbus function allows for client-server communication between a switch module
(server) and a device in the networking running MODBUS client software (client).
TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the Modbus function.
To access this page, click Management > TCP Modbus > TCP Modbus Settings.
Figure 117: Management > TCP Modbus > TCP Modbus Settings
The following table describes the items in the previous figure.
Item
State
Click Disabled or Enabled to set the TCP Modbus state.
Time out
Enter the value (1 to 86400) to define the timeout period between transport
time.
Apply
Click Apply to save the values and update the screen.
Table 105: Management > TCP Modbus > TCP Modbus Settings
174
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
