Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Enable SNTP
Click the radio button to enable or disable the SNTP.
SNTP/NTP Server
Enter the address of the SNTP server. This is a text string of up to 64 characters
Address
containing the encoded unicast IP address or hostname of a SNTP server. Unicast
SNTP requests will be sent to this address. If this address is a DNS hostname,
then that hostname should be resolved into an IP address each time a SNTP
request is sent to it.
SNTP Port
Enter the port on the server to which SNTP requests are to be sent. Allowed
range is 1 to 65535 (default: 123).
Manual Time
Click the drop-down menus to set local date and time of the system.
Time Zone
Click the drop-down menu to select a system time zone.
Daylight Saving Time
Click the drop-down menu to enable or disable the daylight saving time settings.
Daylight Saving Time
Enter the offsetting variable in seconds to adjust for daylight saving time.
Offset
Recurring From
Click the drop-down menu to designate the start date and time for daylight
saving time.
Recurring To
Click the drop-down menu to designate the end date and time for daylight
saving time.
Non-Recurring From
Click the drop-down menu to designate a start date and time for a non-recurring
daylight saving time event.
Non-Recurring To
Click the drop-down menu to designate the end date and time for a non-
recurring daylight saving time event.
Apply
Click Apply to save the values and update the screen.
Table 25: System > System Time
77
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
