If one of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the user
manual
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
Instructions for installation in a pollution Degree 2 environment or equivalent statement.
PoE requirements:
This product was in-door used and not connected to outside plant, so user manual shall
have the description as below or equivalent: "The equipment is to be connected only to
PoE networks without routing to the outside plant."
Do NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE
TEMPERATURE MAY GO BELOW -40°C(-40°F) OR ABOVE 75°C(167°F) THIS COULD DAMAGE
THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.
21
eWorx SE500 Series Switches
: