Table of Contents
Advertisement
Item
Port Select
Enter the switch port (part of VLAN configuration) to configure the
selection as a tunnel port.
Outer PVID
Enter the Port VLAN ID (PVID) to assigned the native VLAN ID. All
untagged traffic coming in or out of the 802.1Q port is forwarded based on
the PVID value
Outer Mode
Click the drop-down menu to select between UNI or NNI role.
Apply
Click Apply to save the values and update the screen.
Table 40. L2 Switching > Q-in-Q > Port Settings
4.5.6 GARP
The Generic Attribute Registration Protocol (GARP) is a local area network (LAN) protocol. The
protocol defines procedures for the registration and de-registration of attributes (network
identifiers or addresses) by end stations and switches with each other.
GARP Settings
To access this page, click L2 Switching > GARP > GARP Settings.
95
eWorx SE500 Series Switches
UNI: Selects a user-network interface which specifies communication
between the specified user and a specified network.
NNI: Selects a network-to-network interface which specifies
communication between two specified networks.
Description
:
Advertisement
Table of Contents
