Table of Contents
Advertisement
Figure 80: Security > Storm Control > Global Settings
The following table describes the items in the previous figure.
Item
Unit
Select pps or bps control units for the Storm Control function.
Preamble & IFG
Select Excluded or Included to setup the Storm Control Global settings.
Excluded: exclude preamble & IFG (20 bytes) when count ingress storm control
rate.
Included: include preamble & IFG (20 bytes) when count ingress storm control
rate.
Apply
Click Apply to save the values and update the screen.
Table 69: Security > Storm Control > Global Settings
Port Settings
The Port Settings page allows you to configure the port and the type of storm control
association along with the value of the storm rate for the selected port.
To access this page, click Security > Storm Control > Port Settings.
127
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
