Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Click the drop-down menu to select the port to define the Egress queue.
Queue
Click the drop-down menu to set the queue order for the Egress setting.
State
Click Disabled or Enabled to set the Egress queue state.
CIR (Kbps)
Enter the value in Kbps (16 to 1000000) to set the CIR rate for the Egress queue.
Apply
Click Apply to save the values and update the screen.
Table 92: QoS > Rate Limit > Egress Queue
4.9 MANAGEMENT
4.9.1 LLDP
LLDP is a one-way protocol without request/response sequences. Information is advertised by
stations implementing the transmit function, and is received and processed by stations
implementing the receive function.
LLDP System Settings
The LLDP System Settings allows you to configure the status (enabled or disabled) for the
protocol, set the interval for frame transmission, set the hold time multiplier and the re-
initialization delay.
To access this page, click Management > LLDP > LLDP System Settings.
158
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
