Figure 10: Securing Wall Mounting Screws
Make sure the screws dimensions are suitable for use with the wall mounting plate.
Do not completely tighten the screws into the wall. A final adjustment may be needed before
fully securing the wall mounting plates on the wall.
11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it forward to lock in place, see the
following figure.
Figure 11: Wall Mount Installation
13. Once the device is installed on the wall, tighten the screws to secure the device.
39
eWorx SE500 Series Switches
: