Tcp Modbus Settings; Figure 4.115 Management > Tcp Modbus Settings > Tcp Modbus Settings - Advantech EKI-9226G Series User Manual

4.9.4

TCP Modbus Settings

The TCP Modbus function allows for client-server communication between a switch
module (server) and a device in the networking running MODBUS client software (cli-
ent).
4.9.4.1 TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click Management > TCP Modbus Settings > TCP Modbus
Settings.
Figure 4.115 Management > TCP Modbus Settings > TCP Modbus Settings
The following table describes the items in the previous figure.
Item
State
Time out
Apply
The ensuing table for TCP Modbus Status settings are informational only: TCP Mod-
bus status and TCP Modbus time out.
Description
Click Disabled or Enabled to set the TCP Modbus state.
Enter the value (1 to 86400) to define the timeout period between
transport time.
Click Apply to save the values and update the screen.
110 EKI-9226G Series User Manual