Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
IP Precedence to Queue Mapping
IP Precedence
Displays the IP precedence value for the queue map.
Queue
Click the drop-down menu to map a queue value to the selected IP precedence.
Queue to IP Precedence Mapping
Queue
Displays the queue entry for mapping IP precedence values.
IP Precedence
Click the drop-down menu to map an IP precedence value to the selected queue.
Apply
Click Apply to save the values and update the screen.
Table 88: QoS > General > IP Precedence Mapping
4.8.2 QOS BASIC MODE
Quality of Service (QoS) allows to give preferential treatment to certain types of traffic at the
expense of others. Without QoS, the switch offers best-effort service to each packet, regardless
of the packet contents or size sending the packets without any assurance of reliability, delay
bounds, or throughput.
QoS mode supports two modes: 802.1p and DSCP.
Global Settings
The Global Settings page allows you to configure the trust mode to a port selection.
To access this page, click QoS > QoS Basic Mode > Global Settings.
153
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
