Table of Contents
Advertisement
Item
Power Limit From
Classification
Legacy Mode
Priority
Power Limit
Apply
The ensuing table for PoE Information settings are informational only: Port, Enable
State, Power Limit From Classification, Priority, Legacy and Power Limit (W).
4.9.3.3
PoE Port Status
To access this page, click Management > Power Over Ethernet > PoE Port Status.
The ensuing table for PoE Port Status settings are informational only: Port, Current
(mA), Voltage (V), Power (W) and Temp. (°C).
4.9.4
TCP Modbus Settings
The TCP Modbus function allows for client-server communication between a switch
module (server) and a device in the networking running MODBUS client software (cli-
ent).
4.9.4.1
TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click Management > TCP Modbus Settings > TCP Modbus
Settings.
Figure 4.188 Management > TCP Modbus Settings > TCP Modbus Settings
The following table describes the items in the previous figure.
Item
State
Time out
Apply
To access this page, click Management > TCP Modbus Settings > TCP Modbus
Settings.
The following figure displays the TCP Modbus Status settings.
Figure 4.189 Management > TCP Modbus Settings > TCP Modbus Settings
Description
Select Enabled or Disabled to designate the power limit classifica-
tion.
Select Enabled or Disabled to designate the legacy mode option for
the port.
Click the drop-down menu to configure the power supply priority: Crit-
ical, Low, Medium or High. Default is Low.
Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
Click Apply to save the values and update the screen.
Description
Click Disabled or Enabled to set the TCP Modbus state.
Enter the value (1 to 86400) to define the timeout period between
transport time.
Click Apply to save the values and update the screen.
124
EKI-7720 Series User Manual
Advertisement
Table of Contents
