Table 41: L2 Switching > Garp > Garp Settings - Advantech eWorx SE500 User Manual

The following table describes the items in the previous figure.
Item
Join Time Enter a value to specify the time between the transmission of GARP PDUs
registering (or re-registering) membership for a VLAN or multicast group in
centiseconds. Enter a number between 6 and 600. An instance of this timer
exists for each GARP participant for each port.
Leave Time Enter a value to specify the time to wait after receiving an unregister request for
a VLAN or multicast group before deleting the associated entry, in centiseconds.
This allows time for another station to assert registration for the same attribute
in order to maintain uninterrupted service. Enter a number between 12 and
3000. An instance of this timer exists for each GARP participant for each port.
Leave All Time Enter a value to specify the Leave All Time controls how frequently Leave All
PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly
be deregistered. Participants will need to rejoin in order to maintain registration.
The Leave All Period Timer is set to a random value in the range of LeaveAllTime
to 1.5*LeaveAllTime. The timer is specified in centiseconds. Enter a number
between 12 and 12000. An instance of this timer exists for each GARP
participant for each port.
Apply Click Apply to save the values and update the screen.
Table 41: L2 Switching > GARP > GARP Settings
GVRP Settings
The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN Registration
Protocol or Generic VLAN Registration Protocol) protocol which facilitates control of virtual
local area networks (VLANs) within a larger network.
To access this page, click L2 Switching > GARP > GVRP Settings.
97
eWorx SE500 Series Switches
Description
: