Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Click the drop-down menu to select the port for the L2 Switch setting.
Enabled
Click the radio-button to enable or disable the Port Setting function.
Speed
Click the drop-down menu to select the port speed: Auto, Auto-10M, Auto-
100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Duplex
Click the drop-down menu to select the duplex setting: Half or Full.
Flow Control
Click the radio button to enable or disable the flow control function.
Apply
Click Apply to save the values and update the screen.
Table 26: L2 Switching > Port Configuration
4.5.2 PORT MIRROR
Port mirroring function allows the sending of a copy of network packets seen on one switch
port to a network monitoring connection on another switch port. Port mirroring can be used to
analyze and debug data or diagnose errors on a network or to mirror either inbound or
outbound traffic (or both).
There are no preset values in the Port Mirror. The displayed values do not represent the actual
setting values.
To access this page, click L2 Switching > Port Mirror.
79
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
