Table of Contents
Advertisement
4.10 DIAGNOSTICS
Through the Diagnostics function configuration of settings for the switch diagnostics is
available.
4.10.1 CABLE DIAGNOSTICS
The Cable Diagnostics page allows you to select the port for applying a copper test.
To access this page, click Diagnostics > Cable Diagnostics.
Figure 130: Diagnostics > Cable Diagnostics
The following table describes the items in the previous figure.
Item
Port
Click the drop-down menu to select a pre-defined port for diagnostic testing.
Giga ports are displayed with a channel A to D designation.
Copper Test
Click Copper Test to display the test result for the selected port.
Table 118: Diagnostics > Cable Diagnostics
4.10.2 PING TEST
The Ping Test page allows you to configure the test log page.
To access this page, click Diagnostics > Ping Test.
191
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
