Tcp Modbus Settings; Figure 4.189 Management > Power Over Ethernet > Poe Port Config Information; Figure 4.190 Management > Tcp Modbus Settings > Tcp Modbus Settings - Advantech EKI-7720 Series User Manual

Item
IEEE Operation
Apply
The ensuing figure displays the PoE Config Information screen. The following infor-
mation displays: Port, Switch State, Priority, Power Limit(W) and IEEE Operation
Type.
Figure 4.189 Management > Power Over Ethernet > PoE Port Config
4.9.4

TCP Modbus Settings

The TCP Modbus function allows for client-server communication between a switch
module (server) and a device in the networking running MODBUS client software (cli-
ent).
4.9.4.1 TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click Management > TCP Modbus Settings > TCP Modbus
Settings.
Figure 4.190 Management > TCP Modbus Settings > TCP Modbus Settings
The following table describes the items in the previous figure.
Item
State
Time out
Apply
To access this page, click Management > TCP Modbus Settings > TCP Modbus
Settings.
Description
Click the drop-down menu to select an IEEE operation feature. The
following options are available:
 IEEE802.3AF/AT
 IEEE802.3AF
Click Apply to save the values and update the screen.
Information
Description
Click Disabled or Enabled to set the TCP Modbus state.
Enter the value (1 to 86400) to define the timeout period between
transport time.
Click Apply to save the values and update the screen.
120 EKI-7720 Series User Manual