Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Enter the port number for the rate limit setup.
State
Select Disabled or Enabled to set the port's state status.
Rate (Kbps)
Enter the value in Kbps (16 to 1000000) to set as the bandwidth rate for the
selected port.
Apply
Click Apply to save the values and update the screen.
Table 90: QoS > Rate Limit > Ingress Bandwidth Control
Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control for a listed
port.
To access this page, click QoS > Rate Limit > Egress Bandwidth Control.
Figure 104: QoS > Rate Limit > Egress Bandwidth Control
156
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
