Ddm; Table 123: Diagnostics > System Log > System Log Server - Advantech eWorx SE500 User Manual

The following table describes the items in the previous figure.
Item
Server Address Enter the IP address of the log server.
Server Port Enter the Udp port number of the log server.
Severity Click the drop-down menu to select the severity level for local log messages. The
default is emerg.
The level options are:








Facility Click the drop-down menu to select facility to which the message refers.
Apply Click Apply to save the values and update the screen.
Table 123: Diagnostics > System Log > System Log Server

4.10.5 DDM

The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
199
eWorx SE500 Series Switches
emerg: Indicates system is unusable. It is the highest level of severity
alert: Indicates action must be taken immediately
crit: Indicates critical conditions
error: Indicates error conditions
warning: Indicates warning conditions
notice: Indicates normal but significant conditions
info: Indicates informational messages
debug: Indicates debug-level messages
Description
: