Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Enabled
Click Enabled or Disabled to set the Global Settings state.
LLDP PDU Disable
Click to select the LLDP PDU handling action when LLDP is globally disabled.
Action
Options include: Filtered, Bridged, or Flooded.
Transmission Interval
Select the interval at which frames are transmitted. The default is 30 seconds,
and the valid range is 5 to 32768 seconds.
Holdtime Multiplier
Select the multiplier on the transmit interval to assign to TTL.
Reinitialization Delay
Select the delay length before re-initialization.
Transmit Delay
Select the delay after an LLDP frame is sent.
Apply
Click Apply to save the values and update the screen.
Table 93: Management > LLDP > LLDP System Settings
LLDP Port Settings
The LLDP Port Settings page allows you to configure the state (enabled or disabled) of the
selected port.
To access this page, click Management > LLDP > LLDP Port Settings.
160
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
