Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Enter the port number for the QoS basic mode setting.
Trust State
Select Enabled or Disabled to set the port's trust state status.
Apply
Click Apply to save the values and update the screen.
Table 89: QoS > QoS Basic Mode > Port Settings
4.8.3 RATE LIMIT
Rate Limits features control on a per port basis. Bandwidth control is supported for the
following: Ingress Bandwidth Control, Egress Bandwidth Control and Egress Queue.
Ingress Bandwidth Control
The Ingress Bandwidth Control page allows you to configure the bandwidth control for a listed
port.
To access this page, click QoS > Rate Limit > Ingress Bandwidth Control.
Figure 103: QoS > Rate Limit > Ingress Bandwidth Control
155
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
