Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
LAG
Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Name
Enter an entry to specify the LAG name.
Type
Click the radio button to specify the type mode: Static or LACP.
Ports
Click the drop-down menu to select designated ports: FE1-8 or GE1-2.
Apply
Click Apply to save the values and update the screen.
Table 30: L2 Switching > Link Aggregation > LAG Management
LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed and flow
control functions.
In this example we will configure a LAG between the following switches:
To access this page, click L2 Switching > Link Aggregation > LAG Port Settings.
Figure 44: L2 Switching > Link Aggregation > LAG Port Settings
83
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
