Item
Detail
Click to display the device details.
Delete
Click to delete the selected devices.
Refresh
Click to refresh the remote device information list.
Table 97: Management > LLDP > LLDP Remote Device Info
LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading.
4.9.2 SNMP
Simple Network Management Protocol (SNMP) is a protocol to facilitate the monitoring and
exchange of management information between network devices. Through SNMP, the health of
the network or status of a particular device can be determined.
SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or disabled).
To access this page, click Management > SNMP > SNMP Settings.
Figure 111: Management > SNMP > SNMP Settings
164
eWorx SE500 Series Switches
Description
: