Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port Select
Enter the switch port (part of VLAN configuration) to configure the selection as a
tunnel port.
Outer PVID
Enter the Port VLAN ID (PVID) to assigned the native VLAN ID. All untagged
traffic coming in or out of the 802.1Q port is forwarded based on the PVID value
Outer Mode
Click the drop-down menu to select between UNI or NNI role.
Apply
Click Apply to save the values and update the screen.
Table 39: L2 Switching > Q-in-Q > Port Settings
94
eWorx SE500 Series Switches
UNI: Selects a user-network interface which specifies communication
between the specified user and a specified network.
NNI: Selects a network-to-network interface which specifies communication
between two specified networks.
Description
:
Advertisement
Table of Contents
