Table of Contents
Advertisement
Figure 58: L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups
The following table describes the items in the previous figure.
Item
VLAN ID
Select the VLAN ID to define IGMP static group.
Group IP Address
Enter the IP address assigned to the VLAN ID.
Member Ports
Enter the port numbers to associate with the static group.
Add
Click Add to add an IGMP group.
Table 47: L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups
.
Multicast Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > Multicast Groups.
Router Ports
To access this page, click L2 Switching > Multicast > IGMP Snooping > Router Ports.
MLD Snooping
The MLD Snooping page allows you to select the snooping status (enable or disable), the
version (v1 or v2) and the enabling/disabling of the report suppression for the MLD querier,
which sends out periodic general MLD queries and are forwarded through all ports in the VLAN.
103
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
